Taizhou Huyang Reliable Machinery Co.,Ltd
Taizhou Huyang Reliable Machinery Co.,Ltd --- Global Injection & Blowing Supplier
Add to Cart
1. Linear construction transports perform for heating and bottle forming
2. Upgrade production capacity
3. Upgrade power efficiency
3. Simplified operation by MMI control panel
4. Modular design facilitates maintenance
5. Save investment and enhance capacity
6. Minimum space
Introduction
RM Stretch Blow Molding Machine is suitable to produce different shapes of PET/PE bottles. It can blow from 100ml to 2000ml bottles, 3-8L, 3-5Gallon it is widely used to produce mineral water bottles,carbonater soft drink bottles,juice bottles, and oil bottles etc.
1.The bottle blowing machine is used for PET water bottle, hot filling bottle, steam drink bottle, edible oil bottle, pesticide bottle and so on.
2.Bottle blowing machine adopts servo control system, which has the characteristics of stable and reliable structure, fast and stable, easy to maintain, convenient and convenient for mould, and meets the need of continuous production on-line.
3.Touch screen control and temperature adjustment make it easy to blow different bottle type temperature regulation.
4.Its servo transmission system has high positioning accuracy, fast and stable speed, good reliability, no gas source saving energy, low maintenance cost, and the tension rod is controlled by servo motor.
5.Bottle blowing machine has the advantage that can be segmented stretching, bottle embryo location and first, to ensure that the stretch when the bottle embryo verticality, second drawing again, to ensure that every bottle embryo tensile uniformity and consistency. Fast stretch and accurate position.
Advantage
1,Infrared lamps adoped in the pre-heater ensures PET preforms being heated evenly.
2,Mechanical-double-arm calmping ensures mould being tightly closed under hight pressure and high temperature.
3,Pneumatic system consists of two parts. pneumatic acting part and bottle blowing part in order to meet different requirements for both acting and blowing. It provides sufficient steady high pressure to blowing. It provides sufficient steady high pressure to bloww large irregular shape bottles.
4,Equipped with silencer and oiling system to lubricate the mechanical pars of the machine.
5,Operated step-by-step and in auto maode.
6,Wide-mouth jar and hot-fill bottles can also be made.
| RM-2000 | |||
| MOLDING | Clamping force | kg | 1600 |
| Clamping stroke | mm | 125 | |
| Stretching stroke | mm | 350 | |
| Bottom Stroke | mm | 30-70 | |
| Cavity pitch | mm | 120 | |
| Number of Cavity | Cavities | 2 | |
| CONTAINER | Max.container volume | itr | 1.5 |
| Neck diameter range | mm | 18-38 | |
| Max.container diameter | mm | 115 | |
| Max.container height | mm | 320 | |
| Carriage unit | pcs | 58 | |
| THEORETICAL OUTPUT | bph | 2000 | |
| ELECTRICAL SYSTEM | Total power | kw | 30 |
| Heating power | kw | 10 | |
| Max.heating power | kw | 24 | |
| AIRSYSTEM | Operating pressure | kg/cm2 | 7 |
| Air consuming | Itr/min | 1000 | |
| Blowing pressure | kg/cm2 | 35 | |
| Air consuming | Itr/min | 3200 | |
| AIR DRYER | Operating pressure | kg/cm2 | 2-4 |
| Temperature |
| 10-12 | |
| Consuming | kcal/hr | 5400 | |
| Flow rate | Itr/min | 30 | |
| WATER CHILLER | Operating pressure | kg/cm2 | 2-4 |
| Temperature |
| 30 | |
| Consuming | kcal/hr | 39000 | |
| Flow rate | Itr/min | 130 | |
| MACHINE | Machine size | mm | 1950-1750-2200 |
| Machine weight | kg | 2800 | |
| REMARKS | 1. All data standard infication for 0.6L bottle. 2. The actual output depends on the preform quality and bottle shape. 3. Specifications are subject to change without notice. 4. Please provide the stable ambient temperature. | ||
