Taizhou Huyang Reliable Machinery Co.,Ltd
Taizhou Huyang Reliable Machinery Co.,Ltd --- Global Injection & Blowing Supplier
Add to Cart
Mould: 6 cavity blowing bottle mould
| Container |
Max.Container Volume | ltr | 2 |
| Max.Neck Diameter | mm | 50 | |
| Max.Container Diameter | mm | 110 | |
| Max.Container Height | mm | 320 |
Plastic Bottle 200-2000ML Processing Machinery Bottle Blow Molding Machine For Water Line
RM Series is Dual-purpose Automatic Blow Molding Machine
By structure optimization and technicial innovation, Cost-effective PET bottle blowing machine.
RM series PET blowing machines are double-purpose blowing machines. According to different tpes of preforms,users can choose different operation method flexibly. For ordinary preforms, the machine can runs full automatically with preform auto-loader. For special preforms, they will be loaded manually. Its multiple use and low cost will save you much.
RM series of blowing machines can produce different shapes of 0.33L 0.6L, 1.5L, 2L carbonated, mineral, pesticide, cosmetics, wide-mouth and other plastic PET/PP containers.
Aadvantages of blowing machines:
Low rejection rate, high speed,stable running and easy operation.
| Technical Parameters | RM-6000D | RM-6000SF | |||
| Molding |
Clamping Force | kg | 26000 | 26000 | |
| Clamping Stroke | mm | 125 | 125 | ||
| Stretching Stroke | mm | 450 | 450 | ||
| Bottom Stroke | mm | 40/70 | 40/70 | ||
| Cavity Spacing | mm | 120 | 120 | ||
| Number of Cavity | Cavities | 6 | 6 | ||
| Carriage Unit | pcs | 162 | 162 | ||
| Theoretical Output | bph | 5000-6000 | 6000-7200 | ||
Electrical System |
Total Power | kw | 75 | 78 | |
| Heating Power | kw | 48×1.5KW=72 | 48×1.5KW=72 | ||
| Number of Lamp Layers | Layers | 8 | 8 | ||
| Air System |
Operating Pressure | kg/cm2 | 7-9 | 7-9 | |
| Lower Pressure Air Consumption | ltr/min | 3000 | 2000 | ||
| Blowing Pressure | kg/cm2 | 20-30 | 30-40 | ||
| High Pressure Air Consumption | ltr/min | 4800 | 6000 | ||
| Chiller |
Operating Pressure | kg/cm2 | 2-4 | 2-4 | |
| Temperature Range | ºC | 10-12 | 10-12 | ||
| Consumption | kcal/hr | 2000 | 3000 | ||
| Flow Rate | ltr/min | 350 | 350 | ||
| Main Machine | Main Machine Dimensions | mm(L*W*H) | 3700×2150×2150 | 3700×2150×2150 | |
| Main Machine Weight | kg | 5500 | 5700 | ||
Preform Loader |
Perform Loader Dimensions | mm(L*W*H) | 2350×1350×2650 | 2350×1350×2650 | |
| Perform Loader Weight | kg | 550 | 550 | ||
Plastic Bottle 200-2000ML Processing Machinery Bottle Blow Molding Machine For Water Line
Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.