Taizhou Huyang Reliable Machinery Co.,Ltd
Taizhou Huyang Reliable Machinery Co.,Ltd --- Global Injection & Blowing Supplier
Add to Cart
6000BPH Automatic 6 cavities Stretch Bottle Blow Molding Machine To Make Bottle With PET Preform
Max Capacity: 6000BPH based on 0.6L Bottle
Main Buying Procedures
I.Parameter
Bottle Blow Molding Machine
| MOLDING | Clamping force | kg | 48000 |
| Clamping stroke | mm | 125 | |
| Stretching stroke | mm | 350 | |
| Bottom Stroke | mm | 30-70 | |
| Cavity pitch | mm | 120 | |
| Number of Cavity | Cavities | 6 | |
| CONTAINER | Max. container volume | itr | 1.5 |
| Neck diameter range | mm | 18-38 | |
| Max. container diameter | mm | 115 | |
| Max. container height | mm | 320 | |
| Carriage unit | pcs | 166 | |
| THEORETICAL OUTPUT |
| 6000 | |
| ELECTRICAL SYSTEM | Total power | kw | 78 |
| Heating power | kw | 40 | |
| Max. heating power | kw | 72 | |
| AIRSYSTEM | Operating pressure | kg/cm2 | 7 |
| Air consuming | Itr/min | 1500 | |
| Blowing pressure | kg/cm2 | 35 | |
| Air consuming | Itr/min | 7400 | |
| AIR DRYER | Operating pressure | kg/cm2 | 2-4 |
| Temperature | 10-12 | ||
| Consuming | kcal/hr | 11400 | |
| Flow rate | Itr/min | 90 | |
| WATER CHILLER | Operating pressure | kg/cm2 | 2-4 |
| Temperature | 30 | ||
| Consuming | kcal/hr | 54000 | |
| Flow rate | Itr/min | 180 | |
| MACHINE | Machine size | mm | 3150-2150-2200 |
| Machine weight | kg | 4500 | |
| REMARKS | 1. All data standard infication for0.6L bottle. | ||
II.Function
Bottle Blow Molding Machine
Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Feature: of Stretch Bottle Blow Molding Machine
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable. 5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: Automatic and manual.
10). Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low costhigh efficiencyeasy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to installtest and start up.
14). Low rejection rate: Less than 0.2 percent.
III.Main Usage
Bottle Blow Molding Machine
Water,CSD,Juice,Tea,Alcohol drinks, Oils,Sauces,Ketchup,Cosmetic container making etc.
IV.Auxiliary Equipment
Bottle Blow Molding Machine
V. Payment & Terms
Bottle Blow Molding Machine
1. Payment Method :
1. 30% by T/T as down payment within 7 days the contract signed
70% by T/T paid before delivery
2. Irrevocable Confirmed L/C at sight .
2 . Mechanical Warranty :
One year warranty and come with at least one year recommended spare parts
3. Delivery & Packing :
Ø Delivery Time: 40~45 days after get down payment & confirmed bottle design
Ø Coming Document:
1) Machine Quality Guarantee
2) Complete set install & maintain instruction Book in English language
3) Complete Document for customer to clear its custom
Ø Packaging requirement:;
1) The special packaging box is according to the immunity standard in China,it suits for long-distance transport, damp proof, rustproof, land way and seaway
2) Transportation ways: Sea transportation
4. Install in Spot :
If Engineers install in spot
1) Installment USD60~100/day. Person as allowance
2) Training fee is free for customer’s workers within the installation period
3) The tickets from China to the customer factory and return paid by the customer
4) The local housing , food, and transfer cost at customer factory paid by the customer
We Warmly Welcome Customers All Over The World To Our Company. If You Have Interests In RM-6000D Automatic 6-cavity Bottle Blow Molding Machine
, Please Contract With Us FREELY!