Taizhou Huyang Reliable Machinery Co.,Ltd
Taizhou Huyang Reliable Machinery Co.,Ltd --- Global Injection & Blowing Supplier
Add to Cart
RM-6000 blow moulding machine is suitable for producing PET plastic containers and bottles in all shapes. The blow moulding machine is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
• High safety. high speed with high efficiency.
• Manual saving, one man is enough for operation the machine.
• Stable performing with easy maintaining.
• Imported PLC controlling and man-machine interface computer
• Japan Omron inspection sensor
• Adopt the new type double bend arm and the four rod-clamping structure(won the patent): Cross direction; Middle mould board is move parallel; the distance between two mold board is adjusted by the chain wheel. Thus, the clamping force is very strong.
• Power saving design that can increase your profits
• Segregate type air controlling system, which is designed for avoiding waste pollution.
Technical Data
| Type | RM-4000 Blow Moulding Machine | |
| Output | According to bottle type | 4000PCS/H |
| | Bottle diameter | 20mm-100mm |
| Bottle height | 50mm-350mm | |
| Bottle mouth diameter | 15mm-38mm | |
| | Cavities | 4cavities |
| Mold thickness | 200mm | |
| Mold effective area | 500*500mm | |
| | Power | 380v 3Phase /220v 3Phase 50/60HZ |
| Install power/actual power | 49kw/10kw | |
| | Low pressure air compressor | 1.2m3/min 1.0MPa |
| High pressure air compressor | 2.0m3/min 3.0MPa | |
| Cold dry machine | 2.0m3/min 3.0MPa 1set | |
| cooling water | Cooling water quantity | 15L/min |
| Main machine size | Length width height/weight | 2308*2058*1920mm/3600kg |
| Feed embryo machine size | Length width height/weight | 2000*950*2480mm/250kg |
