Taizhou Huyang Reliable Machinery Co.,Ltd
Taizhou Huyang Reliable Machinery Co.,Ltd --- Global Injection & Blowing Supplier
Add to Cart
Features--- Hot Filling Bottle Blow Molding Machine
1). Stable performance with advanced PLC for Beverage Bottle Making Machine.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production of Beverage Bottle Making Machine .
4). High adjusting performance to enable pre heat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Beverage Bottle Making Machine introduces the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Beverage Bottle Making Machine has two ways of operating: automatic and manual.
10). Safe,reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). The Beverage Bottle Making Machine is easy for you to install,test and start up.
14). Beverage Bottle Making Machine has low rejection rate: less than 0.2 percent.
Main machine list--- Hot Filling Bottle Blow Molding Machine
| ITEMS | NAME | MODEL | POWER (KW) | QUANTITY | |
| 1 | Blow Molding Machine | RM-A2 | 25kw | 1set | |
| 2 | Preform unscrambler | RM-A2 | 6kw | 1set | |
| 3 | HP Air Compressor | 1.4 m3/min 30Kg | 15kw | 1 set | |
| 4 | LP Air Compressor | 1.0 m3/min 10Kg | 7.5kw | 1 set | |
| 5 | Dryer | 1.0 m3/min 30Kg | 0.75kw | 1 set | |
| 6 | Air filter | 1.0 m3/min 30Kg | / | 2 set | |
| 7 | Air Tank | 0.6 m3/min 30Kg | / | 1 set | |
| 8 | Blow Mould | 500ml | Two cavity | 1 set | |
Advantage
1,Infrared lamps adoped in the pre-heater ensures PET preforms being heated evenly.
2,Mechanical-double-arm calmping ensures mould being tightly closed under hight pressure and high temperature.
3,Pneumatic system consists of two parts. pneumatic acting part and bottle blowing part in order to meet different requirements for both acting and blowing. It provides sufficient steady high pressure to blowing. It provides sufficient steady high pressure to bloww large irregular shape bottles.
4,Equipped with silencer and oiling system to lubricate the mechanical pars of the machine.
5,Operated step-by-step and in auto maode.
6,Wide-mouth jar and hot-fill bottles can also be made.
